2021年4月24日 星期六

HBLbits_Verilog Basic_Mux256to1v

 HBLbits_Verilog Basic_Mux256to1v

Create a 4-bit wide, 256-to-1 multiplexer. The 256 4-bit inputs are all packed into a single 1024-bit input vector. sel=0 should select bits in[3:0], sel=1 selects bits in[7:4], sel=2 selects bits in[11:8], etc.


module top_module( 
    input [1023:0] in,
    input [7:0] sel,
    output [3:0] out );
    assign out = {in[sel * 4 + 3], in[sel * 4 + 2], in[sel * 4 + 1], in[sel * 4]};

/*
// We can't part-select multiple bits without an error, but we can select one bit at a time,
// four times, then concatenate them together.
assign out = {in[sel*4+3], in[sel*4+2], in[sel*4+1], in[sel*4+0]};

// Alternatively, "indexed vector part select" works better, but has an unfamiliar syntax:
// assign out = in[sel*4 +: 4]; // Select starting at index "sel*4", then select a total width of 4 bits with increasing (+:) index number.
// assign out = in[sel*4+3 -: 4]; // Select starting at index "sel*4+3", then select a total width of 4 bits with decreasing (-:) index number.
// Note: The width (4 in this case) must be constant.
*/

endmodule

沒有留言:

張貼留言

113 學年度第 1 學期 RFID應用課程 Arduino程式

113 學年度第 1 學期 RFID應用課程 Arduino程式 https://www.mediafire.com/file/zr0h0p3iosq12jw/MFRC522+(2).7z/file 內含修改過後的 MFRC522 程式庫 (原程式有錯誤) //定義MFRC522...