Verilog HDL: Behavioural Modeling

源自http://asic-soc.blogspot.tw/2012/06/verilog-hdl-behavioural-modeling.html

Verilog HDL: Behavioural Modeling

For complex designs, when algorithms are known.

Behavioural Modeling:

always @ (a,b,sel)

begin

---

---

---

end

always à this block is called structural statement; like cyclic/repetitive behaviour.

@ à event timing control

(a,b,sel) à sensitive list

posedge à +ve edge

negedge à -ve edge

initial à like one shot behaviour/ initialisation purpose; non synthesizable

Sensitivity list should contain all the list of inputs in the combinational circuit. For sequential circuits it is not mandatory. In combinational circuit a missed sensitivity list may violate the functionality of the simulation. But synthesis may be realised properly. Hence we may face simulation and synthesis mismatch.

D-Flip Flop:

always @(posedge clk)

begin

if (rst)                    //i.e.rst == 1’b1

q=1’b0;

else

q=din;

end

endmodule

8 Bitregister Description:

module reg8(q,clk,rst,din)

input clk,rst;

input [7:0] din;

output [7:0] q;

reg [7:0] q;

always @(posedge clk)

begin

if(rst)

q=8’b0;

else

q=din;

end

endmodule

4-Bit Up-Down Counter:

module(q,en,clk,rst,up)

input en,clk,rst,up;

output [3:0] q;

reg [3:0] q;

always @(posedge clk)

begin

if (rst==1’b1)

q=1’b0;

else if (en==1’b1)

if(up==1’b1)

q++;

else if (up==1’b0)

q--;

else if (en==1’b0)

q=1’b0;

end

endmodule