P6-26 4x1 MUX 適用於DE2-70

P6-26 4x1 MUX 適用於DE2-70

//-------------------------------------------------------
//4-bit multiplexer with if...else if...else if...else...
//Filenale : mul4_1_if
//-------------------------------------------------------
module mux_4x1(SW, LEDR, LEDG , CLOCK_27 ,KEY );

input  [17:0] SW; // toggle switches
input  [7:0] KEY;     // Push bottom
input  CLOCK_27; //Clock 27MHz , 50Mhz

output [17:0] LEDR; // red  LEDS   
  output [7:0] LEDG; // green LEDs
  
  
//set original program input , output 

    // Port Declarations
    //(y, s, i);
//output y;
//input [1:0] s;   //Select line
//input [3:0] i;    //Input data
    
    wire [3:0] i;
    wire [1:0] s;
    reg y;
    
    
    //mapping to hardware 
    assign LEDR = SW;
    
    assign i=SW[3:0]; 
    assign s=SW[17:16];


always @ (s or i)
begin
if (s==2'b00)
y = i[0];
else if (s==2'b01)
y = i[1];
else if (s==2'b10)
y = i[2];
else
y = i[3];
end


   assign LEDG[0]=y;

endmodule