ESP32 DHT22 + Telegram

 ESP32 DHT22 + Telegram

#include <WiFi.h>

#include <WiFiClientSecure.h>

#include <UniversalTelegramBot.h>

#include <DHT.h>

// WiFi 資訊

const char* ssid = "Wokwi-GUEST";

const char* password = "";

// Telegram Bot 資訊

// Initialize Telegram BOT

#define BOT_TOKEN "80239061815:AAE0KApbm5Ng00VCvO57JWA_XKtbx6a4IXM"  

// your Bot Token (Get from Botfather)

// Use @myidbot to find out the chat ID of an individual or a group

// Also note that you need to click "start" on a bot before it can

// message you

#define CHAT_ID "79615218469"

// DHT 感測器設定

#define DHTPIN 15         // GPIO15 可更換

#define DHTTYPE DHT22

DHT dht(DHTPIN, DHTTYPE);

// Telegram 通訊

WiFiClientSecure secured_client;

UniversalTelegramBot bot(BOT_TOKEN, secured_client);

// 發送時間控制

unsigned long lastSendTime = 0;

const unsigned long sendInterval = 3000; // 3 秒

void setup() {

  Serial.begin(115200);

  dht.begin();

  // 連接 WiFi

  WiFi.begin(ssid, password);

  Serial.print("連線中");

  while (WiFi.status() != WL_CONNECTED) {

    delay(500);

    Serial.print(".");

  }

  Serial.println("\nWiFi 已連線");

  // 啟用不安全連線（略過 SSL 憑證驗證）

  secured_client.setInsecure();

  // 初始訊息

  bot.sendMessage(CHAT_ID, "ESP32 啟動完成，開始回報溫濕度。", "");

}

void loop() {

  unsigned long now = millis();

  if (now - lastSendTime >= sendInterval) {

    lastSendTime = now;

    float t = dht.readTemperature();

    float h = dht.readHumidity();

    if (isnan(t) || isnan(h)) {

      Serial.println("讀取 DHT22 失敗");

      return;

    }

    String msg = "目前環境數據：\n";

    msg += "溫度：" + String(t, 1) + " °C\n";

    msg += "濕度：" + String(h, 1) + " %";

    Serial.println("發送資料：");

    Serial.println(msg);

    bot.sendMessage(CHAT_ID, msg, "");

  }

}