Verilog examples

 

Verilog examples 源自於https://jupiter.math.nctu.edu.tw/~weng/courses/IC_2007/PROJECT_MATH_CLASS1/3_DESIGN_COMPLEXITY/Verilog%20examples%20useful%20for%20FPGA%20&%20ASIC.htm The following are some of useful verilog examples. verilog example code for flip-flop with a positive-edge clock verilog example code for a flip-flop with a negative-edge clock and asynchronous clear verilog example code for flip-flop with a positive-edge clock and synchronous set verilog example code for flip-flop with a positive-edge clock and clock enable verilog example code for a 4-bit register with a positive-edge clock, asynchronous set and clock enable verilog example code for a latch with a positive gate verilog example code for a latch with a positive gate and an asynchronous clear. verilog example code for a 4-bit latch with an inverted gate and an asynchronous preset. verilog example code for a tristate element using a combinatorial process and always block. verilog example code for a tristate element using a concurrent assignment. verilog example code for a 4-bit unsigned up counter with asynchronous clear. verilog example code for a 4-bit unsigned down counter with synchronous set. verilog example code for a 4-bit unsigned up counter with an asynchronous load from primary input. verilog example code for a 4-bit unsigned up counter with a synchronous load with a constant. verilog example code for a 4-bit unsigned up counter with an asynchronous clear and a clock enable. verilog example code for a 4-bit unsigned up/down counter with an asynchronous clear. verilog example code for a 4-bit signed up counter with an asynchronous reset. verilog example code for a 4-bit signed up counter with an asynchronous reset and a modulo maximum. verilog example code for a 4-bit unsigned up accumulator with an asynchronous clear. verilog example code for an 8-bit shift-left register with a positive-edge clock, serial in and serial out. verilog example code for an 8-bit shift-left register with a negative-edge clock, a clock enable, a serial in and a serial out. verilog example code for an 8-bit shift-left register with a positive-edge clock, asynchronous clear, serial in and serial out. verilog example code for an 8-bit shift-left register with a positive-edge clock, a synchronous set, a serial in and a serial out. verilog example code for an 8-bit shift-left register with a positive-edge clock, a serial in and a parallel out 8-bit shift-left register with a positive-edge clock,an asynchronous parallel load, a serial in and a serial out verilog example code for an 8-bit shift-left register with a positive clock,a synchronous parallel load,a serial in and a serial out verilog example code for an 8-bit shift-left/shift-right register with a positive-edge clock, a serial in and a serial out verilog example code for a 4-to-1 1-bit MUX using an If statement. verilog example code for a 4-to-1 1-bit MUX using a Case statement. verilog example code for a 3-to-1 1-bit MUX with a 1-bit latch. verilog example code for a 1-of-8 decoder verilog example code leads to inference of a 1-of-8 decoder verilog example code for a 3-bit 1-of-9 Priority Encoder verilog example code for a logical shifter verilog example code for an unsigned 8-bit adder with carry in verilog example code for an unsigned 8-bit adder with carry out verilog example code for an unsigned 8-bit adder with carry in and carry out verilog example code for an unsigned 8-bit adder/subtractor verilog example code for an unsigned 8-bit greater or equal comparator verilog example code for an unsigned 8x4-bit multiplier Verilog template shows multiplication operation placed outside always block and pipeline stages represented as single registers Verilog template shows multiplication operation placed inside always block and pipeline stages are represented as single registers Verilog template shows multiplication operation placed outside always block and pipeline stages represented as single registers Verilog template shows multiplication operation placed inside always block and pipeline stages are represented as single registers Verilog template shows multiplication operation placed outside always block and pipeline stages represented as shift registers Use templates to implement Multiplier Adder with 2 Register Levels on Multiplier Inputs in Verilog verilog example code for resource sharing single-port RAM in read-first mode single-port RAM in write-first mode single-port RAM in no-change mode single-port RAM with asynchronous read single-port RAM with "false" synchronous read single-port RAM with synchronous read (read through) verilog example code for a single-port block RAM with enable verilog example code for a dual-port RAM with asynchronous read verilog example code for a dual-port RAM with false synchronous read verilog example code for a dual-port RAM with synchronous read (read through) verilog example code for a dual-port RAM with enable on each port verilog example code for a ROM with registered output verilog example code for a ROM with registered address verilog example code for an FSM with a single process verilog example code for an FSM with two processes verilog example code for an FSM with three processes Top verilog example code for flip-flop with a positive-edge clock. module flop (clk, d, q); input clk, d; output q; reg q; always @(posedge clk) begin q <= d; end endmodule Top verilog example code for a flip-flop with a negative-edge clock and asynchronous clear. module flop (clk, d, clr, q); input clk, d, clr; output q; reg q; always @(negedge clk or posedge clr) begin if (clr) q <= 1𠮨0; else q <= d; end endmodule Top verilog example code for flip-flop with a positive-edge clock and synchronous set. module flop (clk, d, s, q); input clk, d, s; output q; reg q; always @(posedge clk) begin if (s) q <= 1𠮨1; else q <= d; end endmodule Top verilog example code for flip-flop with a positive-edge clock and clock enable. module flop (clk, d, ce, q); input clk, d, ce; output q; reg q; always @(posedge clk) begin if (ce) q <= d; end endmodule Top verilog example code for a 4-bit register with a positive-edge clock, asynchronous set and clock enable. module flop (clk, d, ce, pre, q); input clk, ce, pre; input [3:0] d; output [3:0] q; reg [3:0] q; always @(posedge clk or posedge pre) begin if (pre) q <= 4𠮨1111; else if (ce) q <= d; end endmodule Top verilog example code for a latch with a positive gate. module latch (g, d, q); input g, d; output q; reg q; always @(g or d) begin if (g) q <= d; end endmodule Top verilog example code for a latch with a positive gate and an asynchronous clear. module latch (g, d, clr, q); input g, d, clr; output q; reg q; always @(g or d or clr) begin if (clr) q <= 1𠮨0; else if (g) q <= d; end endmodule Top verilog example code for a 4-bit latch with an inverted gate and an asynchronous preset. module latch (g, d, pre, q); input g, pre; input [3:0] d; output [3:0] q; reg [3:0] q; always @(g or d or pre) begin if (pre) q <= 4𠮨1111; else if (~g) q <= d; end endmodule Top verilog example code for a tristate element using a combinatorial process and always block. module three_st (t, i, o); input t, i; output o; reg o; always @(t or i) begin if (~t) o = i; else o = 1𠮨Z; end endmodule Top verilog example code for a tristate element using a concurrent assignment. module three_st (t, i, o); input t, i; output o; assign o = (~t) ? i: 1𠮨Z; endmodule Top verilog example code for a 4-bit unsigned up counter with asynchronous clear. module counter (clk, clr, q); input clk, clr; output [3:0] q; reg [3:0] tmp; always @(posedge clk or posedge clr) begin if (clr) tmp <= 4𠮨0000; else tmp <= tmp + 1𠮨1; end assign q = tmp; endmodule Top verilog example code for a 4-bit unsigned down counter with synchronous set. module counter (clk, s, q); input clk, s; output [3:0] q; reg [3:0] tmp; always @(posedge clk) begin if (s) tmp <= 4𠮨1111; else tmp <= tmp - 1𠮨1; end assign q = tmp; endmodule Top verilog example code for a 4-bit unsigned up counter with an asynchronous load from primary input. module counter (clk, load, d, q); input clk, load; input [3:0] d; output [3:0] q; reg [3:0] tmp; always @(posedge clk or posedge load) begin if (load) tmp <= d; else tmp <= tmp + 1𠮨1; end assign q = tmp; endmodule Top verilog example code for a 4-bit unsigned up counter with a synchronous load with a constant. module counter (clk, sload, q); input clk, sload; output [3:0] q; reg [3:0] tmp; always @(posedge clk) begin if (sload) tmp <= 4𠮨1010; else tmp <= tmp + 1𠮨1; end assign q = tmp; endmodule Top verilog example code for a 4-bit unsigned up counter with an asynchronous clear and a clock enable. module counter (clk, clr, ce, q); input clk, clr, ce; output [3:0] q; reg [3:0] tmp; always @(posedge clk or posedge clr) begin if (clr) tmp <= 4𠮨0000; else if (ce) tmp <= tmp + 1𠮨1; end assign q = tmp; endmodule Top verilog example code for a 4-bit unsigned up/down counter with an asynchronous clear. module counter (clk, clr, up_down, q); input clk, clr, up_down; output [3:0] q; reg [3:0] tmp; always @(posedge clk or posedge clr) begin if (clr) tmp <= 4𠮨0000; else if (up_down) tmp <= tmp + 1𠮨1; else tmp <= tmp - 1𠮨1; end assign q = tmp; endmodule Top verilog example code for a 4-bit signed up counter with an asynchronous reset. module counter (clk, clr, q); input clk, clr; output signed [3:0] q; reg signed [3:0] tmp; always @ (posedge clk or posedge clr) begin if (clr) tmp <= 4𠮨0000; else tmp <= tmp + 1𠮨1; end assign q = tmp; endmodule Top verilog example code for a 4-bit signed up counter with an asynchronous reset and a modulo maximum. module counter (clk, clr, q); parameter MAX_SQRT = 4, MAX = (MAX_SQRT*MAX_SQRT); input clk, clr; output [MAX_SQRT-1:0] q; reg [MAX_SQRT-1:0] cnt; always @ (posedge clk or posedge clr) begin if (clr) cnt <= 0; else cnt <= (cnt + 1) %MAX; end assign q = cnt; endmodule Top verilog example code for a 4-bit unsigned up accumulator with an asynchronous clear. module accum (clk, clr, d, q); input clk, clr; input [3:0] d; output [3:0] q; reg [3:0] tmp; always @(posedge clk or posedge clr) begin if (clr) tmp <= 4𠮨0000; else tmp <= tmp + d; end assign q = tmp; endmodule Top verilog example code for an 8-bit shift-left register with a positive-edge clock, serial in and serial out. module shift (clk, si, so); input clk,si; output so; reg [7:0] tmp; always @(posedge clk) begin tmp <= tmp << 1; tmp[0] <= si; end assign so = tmp[7]; endmodule Top verilog example code for an 8-bit shift-left register with a negative-edge clock, a clock enable, a serial in and a serial out. module shift (clk, ce, si, so); input clk, si, ce; output so; reg [7:0] tmp; always @(negedge clk) begin if (ce) begin tmp <= tmp << 1; tmp[0] <= si; end end assign so = tmp[7]; endmodule Top verilog example code for an 8-bit shift-left register with a positive-edge clock, asynchronous clear, serial in and serial out. module shift (clk, clr, si, so); input clk, si, clr; output so; reg [7:0] tmp; always @(posedge clk or posedge clr) begin if (clr) tmp <= 8𠮨00000000; else tmp <= {tmp[6:0], si}; end assign so = tmp[7]; endmodule Top verilog example code for an 8-bit shift-left register with a positive-edge clock, a synchronous set, a serial in and a serial out. module shift (clk, s, si, so); input clk, si, s; output so; reg [7:0] tmp; always @(posedge clk) begin if (s) tmp <= 8𠮨11111111; else tmp <= {tmp[6:0], si}; end assign so = tmp[7]; endmodule Top verilog example code for an 8-bit shift-left register with a positive-edge clock, a serial in and a parallel out. module shift (clk, si, po); input clk, si; output [7:0] po; reg [7:0] tmp; always @(posedge clk) begin tmp <= {tmp[6:0], si}; end assign po = tmp; endmodule Top verilog example code for an 8-bit shift-left register with a positive-edge clock, an asynchronous parallel load, a serial in and a serial out. module shift (clk, load, si, d, so); input clk, si, load; input [7:0] d; output so; reg [7:0] tmp; always @(posedge clk or posedge load) begin if (load) tmp <= d; else tmp <= {tmp[6:0], si}; end assign so = tmp[7]; endmodule Top verilog example code for an 8-bit shift-left register with a positive-edge clock, a synchronous parallel load, a serial in and a serial out. module shift (clk, sload, si, d, so); input clk, si, sload; input [7:0] d; output so; reg [7:0] tmp; always @(posedge clk) begin if (sload) tmp <= d; else tmp <= {tmp[6:0], si}; end assign so = tmp[7]; endmodule Top verilog example code for an 8-bit shift-left/shift-right register with a positive-edge clock, a serial in and a serial out. module shift (clk, si, left_right, po); input clk, si, left_right; output po; reg [7:0] tmp; always @(posedge clk) begin if (left_right == 1𠮨0) tmp <= {tmp[6:0], si}; else tmp <= {si, tmp[7:1]}; end assign po = tmp; endmodule Top verilog example code for a 4-to-1 1-bit MUX using an If statement. module mux (a, b, c, d, s, o); input a,b,c,d; input [1:0] s; output o; reg o; always @(a or b or c or d or s) begin if (s == 2𠮨00) o = a; else if (s == 2𠮨01) o = b; else if (s == 2𠮨10) o = c; else o = d; end endmodule Top verilog example code for a 4-to-1 1-bit MUX using a Case statement. module mux (a, b, c, d, s, o); input a, b, c, d; input [1:0] s; output o; reg o; always @(a or b or c or d or s) begin case (s) 2𠮨00 : o = a; 2𠮨01 : o = b; 2𠮨10 : o = c; default : o = d; endcase end endmodule Top verilog example code for a 3-to-1 1-bit MUX with a 1-bit latch. module mux (a, b, c, d, s, o); input a, b, c, d; input [1:0] s; output o; reg o; always @(a or b or c or d or s) begin if (s == 2𠮨00) o = a; else if (s == 2𠮨01) o = b; else if (s == 2𠮨10) o = c; end endmodule Top verilog example code for a 1-of-8 decoder. module mux (sel, res); input [2:0] sel; output [7:0] res; reg [7:0] res; always @(sel or res) begin case (sel) 3𠮨000 : res = 8𠮨00000001; 3𠮨001 : res = 8𠮨00000010; 3𠮨010 : res = 8𠮨00000100; 3𠮨011 : res = 8𠮨00001000; 3𠮨100 : res = 8𠮨00010000; 3𠮨101 : res = 8𠮨00100000; 3𠮨110 : res = 8𠮨01000000; default : res = 8𠮨10000000; endcase end endmodule Top Following verilog example code leads to inference of a 1-of-8 decoder. module mux (sel, res); input [2:0] sel; output [7:0] res; reg [7:0] res; always @(sel or res) begin case (sel) 3𠮨000 : res = 8𠮨00000001; 3𠮨001 : res = 8𠮨00000010; 3𠮨010 : res = 8𠮨00000100; 3𠮨011 : res = 8𠮨00001000; 3𠮨100 : res = 8𠮨00010000; 3𠮨101 : res = 8𠮨00100000; // 110 and 111 selector values are unused default : res = 8𠮨xxxxxxxx; endcase end endmodule Top verilog example code for a 3-bit 1-of-9 Priority Encoder. module priority (sel, code); input [7:0] sel; output [2:0] code; reg [2:0] code; always @(sel) begin if (sel[0]) code = 3𠮨000; else if (sel[1]) code = 3𠮨001; else if (sel[2]) code = 3𠮨010; else if (sel[3]) code = 3𠮨011; else if (sel[4]) code = 3𠮨100; else if (sel[5]) code = 3𠮨101; else if (sel[6]) code = 3𠮨110; else if (sel[7]) code = 3𠮨111; else code = 3𠮨xxx; end endmodule Top verilog example code for a logical shifter. module lshift (di, sel, so); input [7:0] di; input [1:0] sel; output [7:0] so; reg [7:0] so; always @(di or sel) begin case (sel) 2𠮨00 : so = di; 2𠮨01 : so = di << 1; 2𠮨10 : so = di << 2; default : so = di << 3; endcase end endmodule Top verilog example code for an unsigned 8-bit adder with carry in. module adder(a, b, ci, sum); input [7:0] a; input [7:0] b; input ci; output [7:0] sum; assign sum = a + b + ci; endmodule verilog example code for an unsigned 8-bit adder with carry out. module adder(a, b, sum, co); input [7:0] a; input [7:0] b; output [7:0] sum; output co; wire [8:0] tmp; assign tmp = a + b; assign sum = tmp [7:0]; assign co = tmp [8]; endmodule Top verilog example code for an unsigned 8-bit adder with carry in and carry out. module adder(a, b, ci, sum, co); input ci; input [7:0] a; input [7:0] b; output [7:0] sum; output co; wire [8:0] tmp; assign tmp = a + b + ci; assign sum = tmp [7:0]; assign co = tmp [8]; endmodule Top verilog example code for an unsigned 8-bit adder/subtractor. module addsub(a, b, oper, res); input oper; input [7:0] a; input [7:0] b; output [7:0] res; reg [7:0] res; always @(a or b or oper) begin if (oper == 1𠮨0) res = a + b; else res = a - b; end endmodule Top verilog example code for an unsigned 8-bit greater or equal comparator. module compar(a, b, cmp); input [7:0] a; input [7:0] b; output cmp; assign cmp = (a >= b) ? 1𠮨1 : 1𠮨0; endmodule Top verilog example code for an unsigned 8x4-bit multiplier. module compar(a, b, res); input [7:0] a; input [3:0] b; output [11:0] res; assign res = a * b; endmodule Top Following Verilog template shows multiplication operation placed outside always block and pipeline stages represented as single registers. module mult(clk, a, b, mult); input clk; input [17:0] a; input [17:0] b; output [35:0] mult; reg [35:0] mult; reg [17:0] a_in, b_in; wire [35:0] mult_res; reg [35:0] pipe_1, pipe_2, pipe_3; assign mult_res = a_in * b_in; always @(posedge clk) begin a_in <= a; b_in <= b; pipe_1 <= mult_res; pipe_2 <= pipe_1; pipe_3 <= pipe_2; mult <= pipe_3; end endmodule Top Following Verilog template shows multiplication operation placed inside always block and pipeline stages are represented as single registers. module mult(clk, a, b, mult); input clk; input [17:0] a; input [17:0] b; output [35:0] mult; reg [35:0] mult; reg [17:0] a_in, b_in; reg [35:0] mult_res; reg [35:0] pipe_2, pipe_3; always @(posedge clk) begin a_in <= a; b_in <= b; mult_res <= a_in * b_in; pipe_2 <= mult_res; pipe_3 <= pipe_2; mult <= pipe_3; end endmodule Top Following Verilog template shows multiplication operation placed outside always block and pipeline stages represented as single registers. module mult(clk, a, b, mult); input clk; input [17:0] a; input [17:0] b; output [35:0] mult; reg [35:0] mult; reg [17:0] a_in, b_in; wire [35:0] mult_res; reg [35:0] pipe_1, pipe_2, pipe_3; assign mult_res = a_in * b_in; always @(posedge clk) begin a_in <= a; b_in <= b; pipe_1 <= mult_res; pipe_2 <= pipe_1; pipe_3 <= pipe_2; mult <= pipe_3; end endmodule Top Following Verilog template shows multiplication operation placed inside always block and pipeline stages are represented as single registers. module mult(clk, a, b, mult); input clk; input [17:0] a; input [17:0] b; output [35:0] mult; reg [35:0] mult; reg [17:0] a_in, b_in; reg [35:0] mult_res; reg [35:0] pipe_2, pipe_3; always @(posedge clk) begin a_in <= a; b_in <= b; mult_res <= a_in * b_in; pipe_2 <= mult_res; pipe_3 <= pipe_2; mult <= pipe_3; end endmodule Top Following Verilog template shows multiplication operation placed outside always block and pipeline stages represented as shift registers. module mult3(clk, a, b, mult); input clk; input [17:0] a; input [17:0] b; output [35:0] mult; reg [35:0] mult; reg [17:0] a_in, b_in; wire [35:0] mult_res; reg [35:0] pipe_regs [3:0]; assign mult_res = a_in * b_in; always @(posedge clk) begin a_in <= a; b_in <= b; {pipe_regs[3],pipe_regs[2],pipe_regs[1],pipe_regs[0]} <= {mult, pipe_regs[3],pipe_regs[2],pipe_regs[1]}; end endmodule Top Following templates to implement Multiplier Adder with 2 Register Levels on Multiplier Inputs in Verilog. module mvl_multaddsub1(clk, a, b, c, res); input clk; input [07:0] a; input [07:0] b; input [07:0] c; output [15:0] res; reg [07:0] a_reg1, a_reg2, b_reg1, b_reg2; wire [15:0] multaddsub; always @(posedge clk) begin a_reg1 <= a; a_reg2 <= a_reg1; b_reg1 <= b; b_reg2 <= b_reg1; end assign multaddsub = a_reg2 * b_reg2 + c; assign res = multaddsub; endmodule Top verilog example code for resource sharing. module addsub(a, b, c, oper, res); input oper; input [7:0] a; input [7:0] b; input [7:0] c; output [7:0] res; reg [7:0] res; always @(a or b or c or oper) begin if (oper == 1𠮨0) res = a + b; else res = a - c; end endmodule Top Following templates show a single-port RAM in read-first mode. module raminfr (clk, en, we, addr, di, do); input clk; input we; input en; input [4:0] addr; input [3:0] di; output [3:0] do; reg [3:0] RAM [31:0]; reg [3:0] do; always @(posedge clk) begin if (en) begin if (we) RAM[addr] <= di; do <= RAM[addr]; end end endmodule Top Following templates show a single-port RAM in write-first mode. module raminfr (clk, we, en, addr, di, do); input clk; input we; input en; input [4:0] addr; input [3:0] di; output [3:0] do; reg [3:0] RAM [31:0]; reg [4:0] read_addr; always @(posedge clk) begin if (en) begin if (we) RAM[addr] <= di; read_addr <= addr; end end assign do = RAM[read_addr]; endmodule Top Following templates show a single-port RAM in no-change mode. module raminfr (clk, we, en, addr, di, do); input clk; input we; input en; input [4:0] addr; input [3:0] di; output [3:0] do; reg [3:0] RAM [31:0]; reg [3:0] do; always @(posedge clk) begin if (en) begin if (we) RAM[addr] <= di; else do <= RAM[addr]; end end endmodule Top verilog example code for a single-port RAM with asynchronous read. module raminfr (clk, we, a, di, do); input clk; input we; input [4:0] a; input [3:0] di; output [3:0] do; reg [3:0] ram [31:0]; always @(posedge clk) begin if (we) ram[a] <= di; end assign do = ram[a]; endmodule Top verilog example code for a single-port RAM with "false" synchronous read. module raminfr (clk, we, a, di, do); input clk; input we; input [4:0] a; input [3:0] di; output [3:0] do; reg [3:0] ram [31:0]; reg [3:0] do; always @(posedge clk) begin if (we) ram[a] <= di; do <= ram[a]; end endmodule Top verilog example code for a single-port RAM with synchronous read (read through). module raminfr (clk, we, a, di, do); input clk; input we; input [4:0] a; input [3:0] di; output [3:0] do; reg [3:0] ram [31:0]; reg [4:0] read_a; always @(posedge clk) begin if (we) ram[a] <= di; read_a <= a; end assign do = ram[read_a]; endmodule Top verilog example code for a single-port block RAM with enable. module raminfr (clk, en, we, a, di, do); input clk; input en; input we; input [4:0] a; input [3:0] di; output [3:0] do; reg [3:0] ram [31:0]; reg [4:0] read_a; always @(posedge clk) begin if (en) begin if (we) ram[a] <= di; read_a <= a; end end assign do = ram[read_a]; endmodule Top verilog example code for a dual-port RAM with asynchronous read. module raminfr (clk, we, a, dpra, di, spo, dpo); input clk; input we; input [4:0] a; input [4:0] dpra; input [3:0] di; output [3:0] spo; output [3:0] dpo; reg [3:0] ram [31:0]; always @(posedge clk) begin if (we) ram[a] <= di; end assign spo = ram[a]; assign dpo = ram[dpra]; endmodule Top verilog example code for a dual-port RAM with false synchronous read. module raminfr (clk, we, a, dpra, di, spo, dpo); input clk; input we; input [4:0] a; input [4:0] dpra; input [3:0] di; output [3:0] spo; output [3:0] dpo; reg [3:0] ram [31:0]; reg [3:0] spo; reg [3:0] dpo; always @(posedge clk) begin if (we) ram[a] <= di; spo = ram[a]; dpo = ram[dpra]; end endmodule Top verilog example code for a dual-port RAM with synchronous read (read through). module raminfr (clk, we, a, dpra, di, spo, dpo); input clk; input we; input [4:0] a; input [4:0] dpra; input [3:0] di; output [3:0] spo; output [3:0] dpo; reg [3:0] ram [31:0]; reg [4:0] read_a; reg [4:0] read_dpra; always @(posedge clk) begin if (we) ram[a] <= di; read_a <= a; read_dpra <= dpra; end assign spo = ram[read_a]; assign dpo = ram[read_dpra]; endmodule Top verilog example code for a dual-port RAM with enable on each port. module raminfr (clk, ena, enb, wea, addra, addrb, dia, doa, dob); input clk, ena, enb, wea; input [4:0] addra, addrb; input [3:0] dia; output [3:0] doa, dob; reg [3:0] ram [31:0]; reg [4:0] read_addra, read_addrb; always @(posedge clk) begin if (ena) begin if (wea) begin ram[addra] <= dia; end end end always @(posedge clk) begin if (enb) begin read_addrb <= addrb; end end assign doa = ram[read_addra]; assign dob = ram[read_addrb]; endmodule Top verilog example code for a ROM with registered output. module rominfr (clk, en, addr, data); input clk; input en; input [4:0] addr; output reg [3:0] data; always @(posedge clk) begin if (en) case(addr) 4𠮨0000: data <= 4𠮨0010; 4𠮨0001: data <= 4𠮨0010; 4𠮨0010: data <= 4𠮨1110; 4𠮨0011: data <= 4𠮨0010; 4𠮨0100: data <= 4𠮨0100; 4𠮨0101: data <= 4𠮨1010; 4𠮨0110: data <= 4𠮨1100; 4𠮨0111: data <= 4𠮨0000; 4𠮨1000: data <= 4𠮨1010; 4𠮨1001: data <= 4𠮨0010; 4𠮨1010: data <= 4𠮨1110; 4𠮨1011: data <= 4𠮨0010; 4𠮨1100: data <= 4𠮨0100; 4𠮨1101: data <= 4𠮨1010; 4𠮨1110: data <= 4𠮨1100; 4𠮨1111: data <= 4𠮨0000; default: data <= 4𠮨XXXX; endcase end endmodule Top verilog example code for a ROM with registered address. module rominfr (clk, en, addr, data); input clk; input en; input [4:0] addr; output reg [3:0] data; reg [4:0] raddr; always @(posedge clk) begin if (en) raddr <= addr; end always @(raddr) begin if (en) case(raddr) 4𠮨0000: data = 4𠮨0010; 4𠮨0001: data = 4𠮨0010; 4𠮨0010: data = 4𠮨1110; 4𠮨0011: data = 4𠮨0010; 4𠮨0100: data = 4𠮨0100; 4𠮨0101: data = 4𠮨1010; 4𠮨0110: data = 4𠮨1100; 4𠮨0111: data = 4𠮨0000; 4𠮨1000: data = 4𠮨1010; 4𠮨1001: data = 4𠮨0010; 4𠮨1010: data = 4𠮨1110; 4𠮨1011: data = 4𠮨0010; 4𠮨1100: data = 4𠮨0100; 4𠮨1101: data = 4𠮨1010; 4𠮨1110: data = 4𠮨1100; 4𠮨1111: data = 4𠮨0000; default: data = 4𠮨XXXX; endcase end endmodule Top verilog example code for an FSM with a single process. module fsm (clk, reset, x1, outp); input clk, reset, x1; output outp; reg outp; reg [1:0] state; parameter s1 = 2𠮨00; parameter s2 = 2𠮨01; parameter s3 = 2𠮨10; parameter s4 = 2𠮨11; always @(posedge clk or posedge reset) begin if (reset) begin state <= s1; outp <= 1𠮨1; end else begin case (state) s1: begin if (x1 == 1𠮨1) begin state <= s2; outp <= 1𠮨1; end else begin state <= s3; outp <= 1𠮨1; end end s2: begin state <= s4; outp <= 1𠮨0; end s3: begin state <= s4; outp <= 1𠮨0; end s4: begin state <= s1; outp <= 1𠮨1; end endcase end end endmodule Top verilog example code for an FSM with two processes. module fsm (clk, reset, x1, outp); input clk, reset, x1; output outp; reg outp; reg [1:0] state; parameter s1 = 2𠮨00; parameter s2 = 2𠮨01; parameter s3 = 2𠮨10; parameter s4 = 2𠮨11; always @(posedge clk or posedge reset) begin if (reset) state <= s1; else begin case (state) s1: if (x1 == 1𠮨1) state <= s2; else state <= s3; s2: state <= s4; s3: state <= s4; s4: state <= s1; endcase end end always @(state) begin case (state) s1: outp = 1𠮨1; s2: outp = 1𠮨1; s3: outp = 1𠮨0; s4: outp = 1𠮨0; endcase end endmodule Top verilog example code for an FSM with three processes. module fsm (clk, reset, x1, outp); input clk, reset, x1; output outp; reg outp; reg [1:0] state; reg [1:0] next_state; parameter s1 = 2𠮨00; parameter s2 = 2𠮨01; parameter s3 = 2𠮨10; parameter s4 = 2𠮨11; always @(posedge clk or posedge reset) begin if (reset) state <= s1; else state <= next_state; end always @(state or x1) begin case (state) s1: if (x1 == 1𠮨1) next_state = s2; else next_state = s3; s2: next_state = s4; s3: next_state = s4; s4: next_state = s1; endcase end Top Home Back