Sensing Light Levels with a Photocell
Table of Contents
- Introduction
- Assemble the Parts
- Configure the Radio
- Wire up the Circuit
- Use it!
1) Introduction
Photocells are a popular component in electronics projects; they let you sense and take action based on the amount of light hitting the cell. Not only are they great for sensing the ambient light to tell if it’s day or night, but they can also be used as an interface input. That is to say, if someone waves their hand over the sensor, the shadow of the user’s hand can actuate some response. Best of all, these sensors are cheap—at about a dollar a piece, they’re a great component to keep stocked in your bins.
The resistance across the two leads of the cell varies according to the amount of light hitting the cell. The more light that hits the cell, the less the resistance is. And, of course, the less light means greater resistance. We’re going to use the XBee 802.15.4 radio’s analog-to-digital converter (ADC) to send these various light levels out into the airwaves as digital data.
Translation
byXBee Project Gallery:
- iDigi Becomes Device Cloud by Etherios
- Getting Started on the Industrial Internet with Jon Bruner of O’Reilly Media & Digi’s Rob Faludi
- Using Sensors for Unique Business Intelligence in Retail
- Digi Helps Wildlife Research Institute Study Bear Hibernation with Remote Monitoring Solution
- The Big Conversation: M2M and Internet of things – do we need a catch-all?
